65 mcculloch sn# 656075301122 75.2 hp mfged for sears.<br /> I HAVE INSTALLED A NEW IMPELLER AND BAILOR PUMP STILL NO WATER THRU THE COOLING JACKETS. HELP PLEASE. THANKS RANDY
Are you using a flush attachment or sticking it in a bucket of water? I would use a barrel before going any further to be sure. If it still doesn't pump, time to tear it back down and check all the gaskets and clearances. Has to be pulling air somewhere.
Also, check the basics. Is the key in the driveshaft/ impeller? Is the water tube engaged properly? Sometimes it seems like you need a third hand to get everything lined up when you are putting it back together. By the way, you must be a pretty fair mechanic to have kept this motor running all these years.
THANKS GUYS WHILE ,I WAS WAITING FOR A REPLY I WENT BACK THRU THIS THING AGAIN. THIS WAS THE THIRD TIME!!!! I LOVE THESE OLD MOTORS BUT ONCE IN A WHILE A FOOL GETS FOOLED. I MADE SOME CHECKS AND BALANED THE ODDS WILL TAKE YOUR ADVICE AND SEE WHAT HAPPENS NEXT. AS FOR THE TANK I HAVE A SHOP DEDICATED TO THIS HOBBY WITH A 250 GALLON TANK AND DRAIN SYSTEM. AND AS FOR BEING A FAIR MECH. NOT ME IM NO MECHANIC CANT<br /><br /> EVEN SPELL IT. THANK YOU A BUNCH RANDY
