no power to ignition

kmkcolts

Recruit
Joined
Jul 11, 2021
Messages
1
i have 4.3 mercruiser tried to start and would only click. The battery was bad so i replaced it. Now i get no click or anything. Have power to the starter but no power to the slave solenoid or 50 amp breaker
 

alldodge

Moderator
Staff member
Joined
Mar 8, 2009
Messages
43,239
Check the 90 Amp fuse, it might have blown. Its on the starter post.

If that is good, then check your 20 amp ignition fuse on the red/purple wire going to the key switch under the helm
 

Attachments

  • 90 amp fuse.jpg
    90 amp fuse.jpg
    14.2 KB · Views: 1
Top