Re: no water pressure
I happened across another board that had an artice posted on a similar problem. I won't post it all here but if you would like to see all the comments, send me an e-mail. This is one reply:<br />It should pee a stronger stream as the RPM's increase. It might be possible that what you are seeing has something to do with the lower unit moving through the water, but it shouldn't work that way. The first thing I'd check is to see if the key that prevents the water pump impeller from spinning on the driveshaft is in place. My guess would be if that key was missing or something has gone wrong, it might spin at a low speed, but just slip at higher RPM's. (Similar to a spun hub on a prop)<br />Another suggestion was that maybe the engine is mounted too high on the transmon and rises above the pick up holes. FYI
