Old Pontoon needs to be revamped

[jhaynes]

We just got a pontoon this wk/end. It needs TLC which we are willing to give but, not quite sure how. We need to replace some of the side panels and I can't seem to find them on-line so far. Any suggestions???

 

[5150abf]

Re: Old Pontoon needs to be revamped

Good luck, as far as I know the only place to get it is from the place that made the boat if they happen to have some left in that size.

Otherwise you are going to have to find something that will work and rivet it to the rail where the old panel was.

That is a pretty specialized part that , as you found out, isn't readily available.

What kind of boat is it?

 

[jhaynes]

Re: Old Pontoon needs to be revamped

It is a 24ft 1983 Admiral. It has the upper deck which is going to be great for the grandkids to jump from and us girls to sun on. I think that we also need to raise up whatever type of "fence" we end up using so water and debris can escape. Any suggestions are appreciated cause we are new at this.

 

[Weldor]

Re: Old Pontoon needs to be revamped

I'll look and see if I can find the site that had replacement panel mat. But if all else fails you could always use aluminum flashing from any Hwd. store. Goggle this " Pontoon Boat Fence Paneling " it's a Vinyl product and should be easy to use.

 

[rickdb1boat]

Re: Old Pontoon needs to be revamped

http://www.pontoonstuff.com/forum/ has some great info on rebuilding toons..

 

[rogerwa]

Re: Old Pontoon needs to be revamped

Here is alink to where you can buy the skin. This site has both glossy and textured aluminum skin..

http://www.pontoonspecialists.com/c-24-railing.aspx