OMC Cobra, How do I check oil on upper / lower?

Fordiesel69

Lieutenant Junior Grade
Joined
Sep 18, 2009
Messages
1,146
Looking to buy a boat, but need to drain and check the drive oil. How do I do it? I have no manual and no experiance with OMC.
 

Don S

Honorary Moderator Emeritus
Joined
Aug 31, 2004
Messages
62,321
Re: OMC Cobra, How do I check oil on upper / lower?

On the dipstick on the top of the drive. The oil passages are connected so there is no checking the lower seperately, if the upper is ok, the lower if full.
 
Joined
Mar 29, 2010
Messages
53
Re: OMC Cobra, How do I check oil on upper / lower?

Slotted screw on top of drive is a dipstick to check the level. If you want to drain the oil to check for water intrusion, remove dipstick, then remove slotted screw on the bottom of the drive near the skeg. I think you refill thru the middle slotted screw hole in the drive. Good luck on your purchase.
 
Top