parts wanted

[bigchill]

i have a 1957 evinrude fast twin 18hp. i need the fuel line fittings to connect my tank to my engine. thanks for any advice.

 

[CAPTBLACKSMARINE]

Re: parts wanted

THEY ARE AVAILABLE FROM ANY EVIN/JOHN DEALER,I DO NOT KNOW OF ANY AFTER MARKET SOURCE FOR THIS FITTING . ATLEAST SO LONG AS IT IS THE ONE I REMEMBER IT BEING ,IF IT IS THE ONE I THINK IT IS THEN IT WILL HAVE THREE HOLES IN THE FITTING.BUT WHY DO YOU NEED ONE IF YOU JUST NEED IT BECAUSE IT IS LEAKING YOU CAN REPLACE THE O'RINGS IN THEM ,BUT IF YOU DO NOT HAVE ONE THEN ALL YOU CAN DO IS BUY ONE. THOUGH YOU MAY CHECK AROUND SOME REPAIR SHOPS LOCAL TO YOU AND GET LUCKY ENOUGH TO FIND A USED ONE ,AND THEN REPLACE THE O'RINGS IN IT .

 

[bigchill]

Re: parts wanted

thanks we dont have any local repair shops within 60 miles. yeah it is the one with three hole on both ends. i bought the motor and the guy gave me the tank but he lost the fuel hose. i will try some dealer and shops further from here.

 

[CAPTBLACKSMARINE]

Re: parts wanted

DANASHER, YOU CAN GO TO THE EVINRUDE WEB SITE AT EVINRUDEOUTBOARDS.COM AND USE THEIR DEALER LOCATER TO GET A PHONE # TO THE NEAREST DEALER YOU COULD PROBABLY CALL AND HAVE THEM SHIP YOU WHAT YOU NEED. BUT BE WARNED THESE FITTINGS ARE NOT CHEAP,GOOD NEWS IS UNLESS YOU LOSE THEM YOU SHOULD NEVER HAVE TO REPLACE THEM AGAIN.

 

[bigchill]

Re: parts wanted

thanks capin for all the help

 

[Bajass235]

Re: parts wanted

Hey Danasher <br /><br />I think I may have a few layin around here<br />If I do i'll ship em out to you <br /><br />No charge<br /><br />I'll get back with you soon

 

[bigchill]

Re: parts wanted

that would be cool bajass, thanks

 

[rolmops]

Re: parts wanted

Hello.<br />That would be double fuel line connectors for a pressure tank.They cost about 60 box new.If you dont have the pressure fuel tank you can count on another hundred for the tank.An alternative could be to install a vacuum driven fuel pump and just use the much cheaper widely available single line connectors.<br />Good Luck

 

[Bajass235]

Re: parts wanted

Sorry :-( false alarm only had one end for it. other must still be on the motor I gave away.. Sorry I tried<br /><br /> Baja

 

[bigchill]

Re: parts wanted

thanks anyway bajass