power trim problem OMC

[GerryLavoie12]

when engaging the trim switch im getting a click at the selonoid but nothing else.. i dont seem to get power to the motor.. any suggestions .. or tests i can do to to get to the source? Motor has been tested and does work.<br />Any help will be appreciated<br />Thanks!

 

[The Marine Doctor]

Re: power trim problem OMC

Do you have access to a jumper cable?<br /><br />Turn on the blower to remove any fumes.<br /><br />Next take the cables and Jump the solenoid. The 2 large terminals are the 2 to jump. <br /><br />If the your T motor starts you will know that the solenoid is the problem and must be replaced.<br /><br />Although its not common for both solenoids to not work at the same time.<br /><br />You are positive that the little motor works?<br /><br />TMD