Powerhead assembly for storage

[Ross Rains]

I am about to reassemble my 1998 200 EFI powerhead. It will not be installed on my boat for 6 to 8 months. What should I use on the bearings (main & rod) for lubrication at start-up that will stay that long? In the past I've used multi-purpose grease with good results but those powerheads were all started within a day or so of assembly. Any suggestions?

 

[rodbolt]

Re: Powerhead assembly for storage

DO NOT USE GREASE. use straight up TCW 3 engine oil and use it liberally. the only grease that is acceptable is needle bearing assy lube and then only where called for.