prop help please 120 hp force

[outlaw418]

i have a 1990 bayliner cobra fish n ski 19ft it has a 120hp force out board on it,

i had the stock prop and it was fine for boating and ski,tube, but i bent two of the three blades on the prop, so i had a local place send it out to be fixed if it could be fixed and the a@@ hole said he lost it, now i have no clue what the prop was pitch and what ever, how can i find out what it was so i can order a new one??????????????????????????????????

he gave me one that he said should be the same! (NOT) IT IS ALSO 3 BLADE AND IT LOOKED WAY TO FLAT! so i took it out on the water today and it comes out of the hole good and thats it! 28mph and revs thats it! it used to go 45mph on the speed-o and i can tell its way slower if i add power after half it just stays 28 and revs???????????

 

[HAV2FISH]

Re: prop help please 120 hp force

I have a 1996 force 120 on a 17ft bass boat, my prop pitch is 19 and my rpm's are 5600 at wide open about 45mph (gps)

 

[Netjunky]

Re: prop help please 120 hp force

I have a 1990 120HP force and the prop that came with it was a 13 x 19p aluminum prop. I would use the prop finder here on iboats to help you out.

 

[john from md]

Re: prop help please 120 hp force

Go to Michigan propeller and look it up on their website. They have direct replacements for Force engines.

John

 

[outlaw418]

Re: prop help please 120 hp force

thanks guys!

i have a 14 x 13p junk for my set up

so if any one has a 13 x 19p let me know!