Props

[jvshark]

I have a Catalina 372 (38') with twin Crusader 350 265 HP engines

The boat is older and many props have been changed over the years.
The current Props are 18 inch 15 pitch 3 blade Brass props.

Where were not getting good RPM or speed and the mechanic said he "reworked" the props and performance improved.

We would like to order spare props, but not sure what size and pitch would be our best bet. Any ideas?

 

[hwsiii]

Re: Props

Jv, we first need to know what he changed the pitch to on the props that he reworked, that is imperative. I assume that we are talking about inboard engines at this time. I need more information if I am going to be able to help you.
Iboats Boat and Motor Info
1. Year, make and model of boat
2. Length, width and base weight of boat, look for boat decal on back of boat
2a.What is the recommended HP for your boat
3. Number of people and gallons of gas normally on boat
4. What do you use the boat for
5. Is it a Deep Vee and if so how many degrees of deadrise
6. Year, make and model of motor
7. HP and gear ratio of motor IMPORTANT
7A If you have a mercruiser and don?t know the ratio get your serial off the outdrive and go here http://www.sterndrives.com/mercruisersterndrives.html
8. Manufacturer?s recommended Wide Open Throttle (WOT) range
9. Anti-ventilation Plate height above keel of boat if it is an outboard in inches
10. Is it a bass boat or does it have a pad bottom
11. Does it have a hydrafoil, dolefin or trim tabs
12. Make, model, diameter, pitch and whether SS or aluminum prop
13. WOT RPM and speed from your current prop and how much gas and how many people were in the boat for the test data and is the speed by GPS. If you do not have a tach you can buy a Tiny Tach for $ 50
14. Are you at sea level or a higher elevation, give us the elevation in feet
15. Has your motor been tuned up lately and have you checked that the carburetor butterfly is opening all the way, checked compression, and looked at the plugs and checked spark, all of the forgoing could be the reason your prop is not attaining full RPM
16. How long has this prop been on the boat and why, at this time, do you think it is the wrong prop
17. Does the prop show any damage that you can see
18. What problems are you trying to cure or what are you looking for the boat to do that it is not doing the way you think it should or to your expectations

REMEMBER, The numbers I give you will be NO better than the information you give me

The only thing I ask of you is to come back and give me a report of WOT RPM and speed for my database.

H