Pull start recoil unit for Chrysler 12.9hp

[MickLovin]

HI guys, I am not having much luck with my pullstart or finding parts for it, so if there is anyone out there that may have a spare pull start recoil for a chrysler 9.9 - 15hp let me know plzzzzzzzzzzz!! :blue:

 

[MickLovin]

Re: Pull start recoil unit for Chrysler 12.9hp

ok new update, after pulling down the recoil pull cord, I know that it will need a spring, they want $70+ for it, so considering it is my auxillary and considering it started first go of the choke and pull, I am pretty sure I can get away with taking the cowl off and starting.
BUT! if anyone can get onto a pull cord recoil set up please let me know. Thanks Guys

 

[Frank Acampora]

Re: Pull start recoil unit for Chrysler 12.9hp

Recoil starters are rarer than hen's teeth. And, the spring alone costs four first born male child.. You are way better off buying a whole junker with a good pull starter if you can find one.

 

[Boatdoc58]

Re: Pull start recoil unit for Chrysler 12.9hp

Send me a serial # I believe I have 6 or so on the shelf...NEW.

 

[MickLovin]

Re: Pull start recoil unit for Chrysler 12.9hp

I am after part no's 13, 14 and 15 of the following diagram

 

[MickLovin]

Re: Pull start recoil unit for Chrysler 12.9hp

I am after part no's 12,13, 14 and 15 of the following diagram View attachment 221678

 

[jerryjerry05]

Re: Pull start recoil unit for Chrysler 12.9hp

I don't like using them,but, boats . net has the stuff.
Go there and index the Force and go to 76 10hp
Like Franks says the spring is crazy expensive.So is the spool.
They say they ship to AU.

 

[Justinde]

Re: Pull start recoil unit for Chrysler 12.9hp

This may well do it for you- located at southport??



Wrecking 15HP Force Outboard Parts in Southport, QLD | eBay

 

[Nordin]

Re: Pull start recoil unit for Chrysler 12.9hp

Justinde He does not have that typ of recoil. This typ was only on Force engines. He has the recoil mounted beside the flywheel.

 

[Justinde]

Re: Pull start recoil unit for Chrysler 12.9hp

As Maxwell Smart once said " Missed it by THAT much"

 

[MickLovin]

Re: Pull start recoil unit for Chrysler 12.9hp

:facepalm: LOL