Question on Prop compatibility on different HP's with the old Fastwin's "HELP"PLEASE"

[rotech]

Question on Prop compatibility on different HP's with the old Fastwin's "HELP"PLEASE"

Can anyone tell me what the compatibility of props on the fastwins are.
I have a 1969 Evinrude Fastwin 18hp.
Will a prop from 15-30 fit on my 18hp shaft?
Iver looked on ebay & the 15 and 25 hp props look the same as the one I have on my motor.
I just wann make sure so I can find the right prop that will fit without spending alot of money on a new prop.
Any help or advice would be appreciated.
Thanx again guyz.

 

[steelespike]

Re: Question on Prop compatibility on different HP's with the old Fastwin's "HELP"PLE

Re: Question on Prop compatibility on different HP's with the old Fastwin's "HELP"PLE

You can figure it yourself right here on iboats.
I checked 15,18,20,25 (30 appears to not match)
You can check the years yourself. Near as I can tell
these motors produce the same list with the only difference being the years covered.

 

[rotech]

Re: Question on Prop compatibility on different HP's with the old Fastwin's "HELP"PLE

Re: Question on Prop compatibility on different HP's with the old Fastwin's "HELP"PLE

Thanx. I looked it up on here as you sujested & found the part # to be the same from like 1964-77
Thanx for the help, I ready to get this puppy going