Request for Photos of Johnson V4 rebuild

[Beakster]

Hi,
A couple of years ago I stripped down my 1980 Johnson 100 V4 Powerhead to rebuild it. Now I'm finally have time to rebuild it and get it in the lake this summer, but the phone which I took all the photos of the dismantling on has been stolen.

I took many careful pictures at every step of the way as I dismantled it and without them I know I'm going to get a bit lost putting things back together. If anyone has photos of the powerhead installed, from all angles, or any photos of the dismantle and rebuild please share them.

Thanks

 

[Scott Danforth]

Its covered in the factory service manual

Original outboard product and service manuals for Johnson, Evinrude, Gale, and OMC

Ken Cook Co. sells Original Product Literature Supporting 1996 and Older Outboard Marine Corporation Products, limited supply of original printings of Johnson, Evinrude, Gale, and OMC manuals are still available. On older literature, we may provide a machine copy reproduced from a master file...

www.outboardbooks.com

 

[stresspoint]

its all nuts and bolts , the V4 is pretty strait forward ,they have a couple of things to consider , like the amount of rollers that go in the conrods , torque specifications ,etc , but as posted the info is in the factory manual.