Revs but no thrust after 2,500rpm

RebelCobalt

Cadet
Joined
Sep 27, 2010
Messages
14
I took my 1998 Cobalt220 out this weekend, and things seemed fine - boat went into gear, got up on to plane fine. I was at about 2,500rpm, and then decided to put the throttle down a little bit. Revs went up, but there was no thrust. It was like the clutch was going in a stick shift car - no power was going to the prop. Any ideas? It idles fine. It goes into gear ok (sometimes a bit clunky, but nothing abnormal). I just had the oil changed in my outdrive. It's a Volvopenta duoprop, and the mechanic had to take both props off to do this, but because one was stuck on, it required heating to get them off. Could this have anything to do with the thing slipping now?
 

Maclin

Admiral
Joined
May 27, 2007
Messages
6,761
Re: Revs but no thrust after 2,500rpm

Are you using the same props? If so I would suspect the hub of the heated one may be slipping now.
 

RebelCobalt

Cadet
Joined
Sep 27, 2010
Messages
14
Re: Revs but no thrust after 2,500rpm

Yes - hes was able to save the props, but said he had to replace the hubs inside. Thx
 
Top