Shakepspeare 2.6 hp

[j_dent3]

Hi
I bought a shakespeare 2.6 hp motor used and I would like to winterize it this week. The only problem is I don't know where I can get a pump to change the gear oil. I'm just looking for a simple hand pump to fill the gear oil. If anyone has a link to one that would be much appreciated. It is a 2012 if that matters.

Here is the link to the motor I bought: Shakespeare 2.6 HP Outboard Motor | Canadian Tire

 

[steelespike]

Re: Shakepspeare 2.6 hp

Speaking generically you don't need a pump.
There should be a drain screw in the lower part of the gear case
and and a vent screw above it. Usually these a slightly over size flat head.Remove the drain screw and then the vent screw,
drain into a container.
Gear lube is available in a tube Fill the gearcase through the "drain"
hole until it comes out the vent hole. Insert the vent screw before removing the tube then quickly insert the drain screw.