slow limp mode problem solved, 25hp 1989 evinrude

wabashire

Recruit
Joined
May 23, 2018
Messages
1
25 hp evinrude intermittently kept going into slow mode. I did some reading of the forums and performed plenty of the usual tests; also put in a new water pump as it was due. The normal slow mode circuit worked fine, but it entered that mode all on its own seemingly at random. Replaced the power pack, and that was it. Hope this helps you.
 

hardwater fisherman

Lieutenant Commander
Joined
Mar 19, 2010
Messages
1,725
Is there a "slow" mode on a 1989 25hp motor? You may have just been running on 1 cylinder..
 
Last edited:

BTL

Petty Officer 2nd Class
Joined
Feb 22, 2017
Messages
106
Is there a "slow" mode on a 1989 25hp motor? You may have just been running on 1 cylinder..

I have the same motor from 1988 and there is no slow mode on mine, it's a pretty basic outboard. I had a similar issue and it wound up being a bad ground on one of my coils.
 
Top