Smart tabs - would they fit?

oshkoshboating

Petty Officer 3rd Class
Joined
Jul 13, 2009
Messages
88
see attached - I don't think I can due to the swim ladder and strap eye-holes. Feedback appreciated. Thanks!
 

Attachments

  • right.JPG
    right.JPG
    60.8 KB · Views: 0
  • left.JPG
    left.JPG
    92.4 KB · Views: 0
  • left2.JPG
    left2.JPG
    81 KB · Views: 0

redone4x4

Lieutenant Commander
Joined
Feb 28, 2009
Messages
1,548
Re: Smart tabs - would they fit?

it might work. have you called to see if they dont work, if you can send them back? I have heard they are easy to work with, it might be worth a shot. Also, to be honest with you I had to move my tie-down points on my trailer to get the straps to clear the tabs properly. didnt want to move them on the boat, so I moved them on the trailer. I dont have any pics of it yet though.
 

WAVENBYE2

Lieutenant Commander
Joined
Apr 28, 2007
Messages
1,636
Re: Smart tabs - would they fit?

Looks like you should sill be able to install them even with the ladder being there, judging by the pics it looks like your latter shouldn't interfere with it, I am only going by the pics, try pretend mounting them(put a tab together with the bracket and hold it up there and see, thats what I would do, but these guys would probably know better, I don't even have mine yet:D
 

redone4x4

Lieutenant Commander
Joined
Feb 28, 2009
Messages
1,548
Re: Smart tabs - would they fit?

Looks like you should sill be able to install them even with the ladder being there, judging by the pics it looks like your latter shouldn't interfere with it, I am only going by the pics, try pretend mounting them(put a tab together with the bracket and hold it up there and see, thats what I would do, but these guys would probably know better, I don't even have mine yet:D

i put mine together and held em up.....it didnt look like it was going to work. but after i started drilling and stuff:eek:, i took the chances and when the tabs were all done, I had an inch or so below the swim step mount where the upper shock mount was. If it didnt work, I figured I would just move one upper mount over, or the whole thing over. but it worked out just fine. you really do have to get them to see. look at it this way, if they didnt work and nauticus wouldnt take them back, someone on here would probably buy them!
 
Top