Hey all, I'm new here. Been reading lots of threads on sport jet repair and maintenance. Lots of good info. I'm working on a 1994 jazz with the sport jet 90. The ride plate on it was a bit bent at the front and had been siliconed on so I thought I should get that off straightened and install a new seal.
Problem I'm having is I just can't seem to fight it back into place with the new seal. I'm using dish soap on the seal and a floor jack to try and squeeze it back in, but can't get it to stay forward enough for it to line up. Hoping someone might have a trick or tip to help. Thanks
Problem I'm having is I just can't seem to fight it back into place with the new seal. I'm using dish soap on the seal and a floor jack to try and squeeze it back in, but can't get it to stay forward enough for it to line up. Hoping someone might have a trick or tip to help. Thanks