Hi Spinner - the only stick steer I've seen is in a package deal through Tracker i think.. I want to say its a mod-v .<br />I think they tag it as a "Crappie" or "pan fish" model not sure on the HP rating or specs tho..<br /><br />www.trackerboats.com -- I think<br /><br />
I have a 1978 kenzie kraft stick steer its great for fishing if he wants to do anything else like pull a tube or ski don't get one. mine has a 55hp.<br />Tracker,G3 and i think lowe still makes them
Fisher used to make them, but they are owned by tracker now.<br /><br />Seen plenty of them, but never over 40hp. Most I've seen are 25hp and under.<br /><br />Looked at Teleflex site some time ago, and their stick steering system says 40hp and under.<br /><br /><br />Same for these: http://www.shootnhunt.com/catalog/JM/boat_controls_and_steering/ezy_glide/6301037.html
Thanks all. Barlow, went there and did not look around too much though.<br /><br />jimr, that's all he will do is fish out of it.<br />I will check them some more.<br />I also thought I seen one time that Weld Boats made them though not for sure.<br /><br />Hey roscoe went to the link and also found one rated at 70HP, so I know they must make a boat out there somewhere for this application.
oops.<br /><br />Ever drive one of those?<br /><br />With a big motor, I would be scared I would fall against the stick and go to full steering left in a millesecond, and flip out of the boat.
Hey roscoe, I did have one a few years ago with a 50 Merc on it and it took some getting use too, but after that it was pretty cool, driving and fishing from the same spot.<br /><br />FYI, weld-craft makes them now.
took a look to see if I was dreamin' and found this thing Spinner. <br />
2005 TRACKER® Panfish 16 <br /><br />I'm not a Tracker guy nor do I know a damn thing about the stick steers but, the Fisher that was mentioned jolted my memory of a past sighting also - I don't know what to think as you can tell.
Yea I seen that Barlow.<br />I think he is wanting something a little bigger.<br />Like I said in above post, weld-craft makes them and he will check them out I guess.
