stickers on a boat

[gumball]

what is the best my to remove the previous license numbers on my boat with damanaging it? 1969 glastron fiberglass rebuilt

 

[mollywalk]

Re: stickers on a boat

A heat gun as long as you move it around, and a 4'blade like a wall remover type but there also is many products like a 3M you can use.<br />I spray on the 3M stuff to remove the final sticky glue after the heat gun for my whole boat.<br />I was very surprise with the quickness.<br /><br />Slowly if you are using a new blade.

 

[gumball]

Re: stickers on a boat

thanks bill i'll try the heat gun today.<br /><br />Marc

 

[kevin500]

Re: stickers on a boat

There is also an "eraser" type remover. It fits in a drill, has a soft rubber disk about 1inch thick X 4 inches diameter. It peels the glue and sticker off of the project, and because it is so soft, will not damage even a new vehicle paint job. No scratches at all. <br />A body shop supply company will sell these things. <br />I know that the blue oval dealer here in town uses this rubber "eraser" to remove the glue residue left over from all of the bodyside molding, I have used it.

 

[gumball]

Re: stickers on a boat

the heat gun work great now i can finally put my new numbers and letters on. thanks alot

 

[Billnicole]

Re: stickers on a boat

Hair Dryer is safer