arks
Lieutenant Commander
- Joined
- Nov 7, 2002
- Messages
- 1,953
I currently have an 8’ fiberglass anchor pin. I’ve been using it by pushing it thru a stern lifting handle on my jonboat. Works ok but if there’s any wave action, it tends to move the boat around enough to move the pin to an angle. I’ve tried tying it off at the top but it doesn’t help.
Considering a bracket that attaches to one side of the outboard mounting bolts but concerned it might not solve the problem. Has anyone used one of these brackets? Not interested in a bracket that attaches to the gunnels or corner brace because I don’t want to make any more holes.

Considering a bracket that attaches to one side of the outboard mounting bolts but concerned it might not solve the problem. Has anyone used one of these brackets? Not interested in a bracket that attaches to the gunnels or corner brace because I don’t want to make any more holes.
