still need to solve the 1996 Force 75hp stalling problem

my new fishmaster

Petty Officer 1st Class
Joined
Aug 11, 2001
Messages
256
Well its a new season and I would like to get this engine working good. I have changed many parts and looked all over the engine for problems. But after lake launching last year I remember how it would stall out. You could idle it and shed stall also at high rpms STALL. Anything I have over looked that obvious to you folks. So far replaced the diaphram,pump bulb,line connections,tightened the out from tank. As you should be aware its a 96 fishmaster Starcraft with the 96 75 force. I personaly think shes not getting hot enough after replacing thermo?
 

12Footer

Fleet Admiral
Joined
Mar 25, 2001
Messages
8,217
Re: still need to solve the 1996 Force 75hp stalling problem

That could be (not developing enough heat), but compression numbers first thing. At the time you check compression, check the plugs..Look for a very clean plug,fouling,and the usual.The plugs can be your best diagnostic tool.<br />Addendum: Check the torque on the fuel pump bolts,as they are going to vibrate loose (if you didn't use threadlocker on the screws). I know, because mine did that that :rolleyes:
 
Top