submerged 20hp johnson

ctrevis7

Seaman
Joined
Aug 13, 2010
Messages
53
today i accidentally submerged my motor while wenching it on the trailer it was under for about 30 sec to a minute i can not get it to start now. i checked spark plugs and didnt see any water. is my motor ruined? what can i do to fix it?

thanks so much
 

tannedman

Seaman
Joined
Jan 25, 2010
Messages
51
Re: submerged 20hp johnson

it should be fine take the plugs out and keep turning it over it probly has water in t last summer some kid at my trailer park pulled the plugs out of 2 boats and noone noticed till the next morning we pulled their plugs turned them over till it stopped spraying water strayed a little WD in the ports while the plugs were still out turned it over a few more times then put the plugs back in and after turning them over a few more times they both started ran rough for a bit but still running good now
 

Rick.

Captain
Joined
Jul 30, 2006
Messages
3,740
Re: submerged 20hp johnson

Drain the carb. and give it fresh gas. Make sure your plugs are dry as well as the cylinders and fire it up as soon as you possibly can. It is urgent to get it going and let it re-lube itself as well as dry out. Time is of the essence. If it sits water will go to work and start to rust parts quickly. Here is a link that will help.. Best of luck. Rick.
http://www.sschapterpsa.com/ramblings/Submerged_outboard.htm
 

ctrevis7

Seaman
Joined
Aug 13, 2010
Messages
53
Re: submerged 20hp johnson

i kept trying to start it but it wont budge i took the plugs out and only the top plug is sparking. wha should i do now?
 

Rick.

Captain
Joined
Jul 30, 2006
Messages
3,740
Re: submerged 20hp johnson

Not sure what year it is and if it has points. Pull the flywheel and make sure all is dry under it. Rick.
 

ctrevis7

Seaman
Joined
Aug 13, 2010
Messages
53
Re: submerged 20hp johnson

It was fresh water and also it is a 1973 20hp johnson.
 

54fleetwin

Petty Officer 1st Class
Joined
Aug 1, 2010
Messages
282
Re: submerged 20hp johnson

So your electrical system may have gotten wet, the engine will run on one cylinder and the heat from running will help dry things out.
The important thing is to get it running
 
Top