Suzuki 9.9DT 1999 - Shift Rod disconnection

[Noel PARIS]

Hi there.<br /><br />Trying to change impeller on my 9.9 Suzuki 1999.<br /><br />Never attempted before on my own. Have removed 4 bolts on lower unit but unit will not drop. Obviously shift rod needs to be disconnected.<br /> <br />Any suggestions please? <br /><br />Any diagrams you could post to my e-mail address leanderf69@gmail.com would assist.<br /><br />Thanks & best Regards<br />Noel<br />Malta

 

[danberlin]

Re: Suzuki 9.9DT 1999 - Shift Rod disconnection

Noel<br />I don't know if this will help but here is a site with parts microfiche diagrams<br /> <br /> http://store.brownspoint.com/df9_9.asp <br /><br /><br />Dan

 

[Noel PARIS]

Re: Suzuki 9.9DT 1999 - Shift Rod disconnection

Originally posted by danberlin:<br /> Noel<br />I don't know if this will help but here is a site with parts microfiche diagrams<br /> <br /> http://store.brownspoint.com/df9_9.asp <br /><br /><br />Dan

Dan,<br /><br />Thank you for your kind feedback - it sure helps!<br /><br />Thanks again.<br />Best Regards<br />Noel

 

[Noel PARIS]

Re: Suzuki 9.9DT 1999 - Shift Rod disconnection

Hi Dan,<br /><br />Wish to confirm that I have successfully replaced the impeller on my Suzuki 9.9.<br /><br />Best Regards

 

[danberlin]

Re: Suzuki 9.9DT 1999 - Shift Rod disconnection

Excellent<br />I just did my yamaha 9.9 last week for the first time<br />Dan

 

[Noel PARIS]

Re: Suzuki 9.9DT 1999 - Shift Rod disconnection

HAVE TRIED STARTING MY SUZUKI 9.9DT ENGINE AFTER FITTING THE NEW IMPELLER WEEKS AGO, BUT NO WATER CAME OUT OF ITS DRAINING HOLES. HAVE RE-CHECKED NEW IMPELLER IN ITS HOUSING WHICH LOOKS O.K. AND FOR ANY BLOCKAGE BUT NONE APPARENT. CAN SOMEONE ASSIST WITH THIS ISSUE?<br /><br />THANKS & REGARDS<br /> <br /><br />

Originally posted by danberlin:<br /> Excellent<br />I just did my yamaha 9.9 last week for the first time<br />Dan