Tach acting up...

[hunting2much]

After replacing the my trim motor and testing the trim wire my tach started acting up. <br /><br />On startup it works fine, but when it get to 2000 or 3000 rpm’s it stop and will bounce back up when I hit the trim… Sounds to me like some sort of ground issue. <br /><br />Does anyone have any thoughts on this??<br /><br />Thanks for your time..

 

[D5GT]

Re: Tach acting up...

Use search word regulator and before you buy new regulator/rectifier check and clean all connections.

 

[gigreg2]

Re: Tach acting up...

Check all Connections before goign forward. The symptoms sound exactly like what happened to my reg/rectifier before it went. turned out i had a bad ground that eventually fried the rectifier. my guess is your replacement of the trim pump you might have missed complete tightening a wire somewhere.

 

[hunting2much]

Re: Tach acting up...

Thanks for the replies, I will go through the connections again this evening and let you all know.<br /><br />thanks again