Tach Problem on 60 HP Johnson

windknot

Recruit
Joined
Mar 2, 2002
Messages
3
My brother-in-law has a 1992 3 cyl 60 HP Johnson. His tach has stopped working properly. It works fine at 1000-3000rpm, but will not go any higher. I checked the voltage at idle speed and it was about 13v. At 1500rpm it was 13.5v. Am I correct that the rectifier is working properly? What could cause this tach problem?
 

Trent

Captain
Joined
Nov 17, 2001
Messages
3,333
Re: Tach Problem on 60 HP Johnson

Yes the recifier is working. Check the connections on the tach and the gray wire at the engine.
 
Top