rosentreter
Seaman Apprentice
- Joined
- Mar 8, 2009
- Messages
- 30
Hello,
I have a 1994-1995 25hp serial number 0G207671.
To test the stator the CDI trouble shooting guide says test between the blue and black wire for low side of stator and the red and black wire for the high side of the stator.
Not sure of which black wire though. The stator wires come down to a three pin connector(blue,red,black) and then goes into the switch box. Coming from the switch box is a black wire connecting to an engine ground and this is the one I think I test between.
2nd question is do I disconnect the three pin connector(blue,red,black) from the switch box?
Thanks,
Rich
I have a 1994-1995 25hp serial number 0G207671.
To test the stator the CDI trouble shooting guide says test between the blue and black wire for low side of stator and the red and black wire for the high side of the stator.
Not sure of which black wire though. The stator wires come down to a three pin connector(blue,red,black) and then goes into the switch box. Coming from the switch box is a black wire connecting to an engine ground and this is the one I think I test between.
2nd question is do I disconnect the three pin connector(blue,red,black) from the switch box?
Thanks,
Rich