Trim Cylinders Trouble shooting?

JAG III

Cadet
Joined
May 17, 2019
Messages
6
1. Pump Works lifts outdrive if I jump motor with jumper wires.
2. Have power on both sides of the 55 amp fuse.
3. Cleaned all relays.
4. I think the problem could be in the buttons how do I test that?
5. Also what is the negative top red button I forgot lol....I hear clicking when I push it but nothing else when I hit the up down arrows.

Thanks in advance!!
 

Attachments

  • fuse.jpg
    fuse.jpg
    98.5 KB · Views: 4
  • Relay .jpg
    Relay .jpg
    1.5 MB · Views: 4
  • Relays .jpg
    Relays .jpg
    1.7 MB · Views: 4
  • Trim Buttons.jpg
    Trim Buttons.jpg
    1.5 MB · Views: 4

JAG III

Cadet
Joined
May 17, 2019
Messages
6
Dr,

Thanks so much for the info. I have a friend coming over tomorrow who’s better at electrical than I am. I’ll make sure to report back our findings and thanks again!

I did find out that top red - button is for beach mode to take leg up further.
 

Scott Danforth

Grumpy Vintage Moderator still playing with boats
Staff member
Joined
Jul 23, 2011
Messages
50,943
that is the tilt button. to bring it above the 7 degrees
 

JAG III

Cadet
Joined
May 17, 2019
Messages
6
I want to thank everyone for all the help! I followed that schematic and couldn't believe that I actually had TWO bad relays.......LOL working like a champ now and everything cleaned up for the better.
 
Top