TRIM/TILT ELECTRICAL CONVERSION

[phx5kegsman]

Hello, I have a 1978 Johnson 115hp Crossflow V4. It has a power trim/tilt with the older solenoid wiring setup. I also have a 1982 Evinrude 115hp Crossflow V4 that I have been using for parts. It has a power trim/tilt with the relay wiring setup. It works much better than the one on the Johnson. I want to swap them. How difficult would that be, and, what's involved in converting to the relay type. Thanks

 

[racerone]

Install the trim / tilt ( 2 wire motor ) of the 82 on the 78.----Install the 82 electrical bits on the 78 as well.-----Trim and tilt switch on the 78 control can stay.