GOOD NEWS. . . . The PICTURE UPLOAD FUNCTION IS WORKING !!! The tech folks at the parent company have been able to remedy the issue. You can upload pictures once again. Thank you for your patience.
I have a 24V Motor Guide X5 I am installing. I have the boat wired with 6 gauge and and installed a 50 amp breaker but thetthe only plug I could find that matches my existing port is 10 gauge, will 6 inches of 10 gauge wire cause a problem?
I have a 24V Motor Guide X5 I am installing. I have the boat wired with 6 gauge and and installed a 50 amp breaker but thetthe only plug I could find that matches my existing port is 10 gauge, will 6 inches of 10 gauge wire cause a problem?
No, a short six inches of 10 gauge will not harm the current needed. The shorter the wires, the more current they can handle...up to a point. But in your situation, it will work just fine. Just make sure you make good quality connections between the 10 gauge and 6 gauge wires and happy boating!
