Trying to figure out the right impeller kit for my boat

[adviner]

On my boat the sterndrive says alpha 1 on it. Its a 2008 Voyager Pontoon boat.
The serial number on the stern drive says: 1A210538 and looking at the sites like

http://www.marineengine.com/mfr/mercruiser_models.html

I cant figure out if its an gen 2. The serial was located in the port side as the picture below shows




Im assuming its a gen 2 because i read somewhere that gen 2 were made from 1991ish and up.

I think this is the right kit for me but just want to make sure:

http://www.iboats.com/mall/partfind...&gd_poid=110874&gd_row=4&session_id=619188618


Thanks

 

[Don S]

Re: Trying to figure out the right impeller kit for my boat

Yes, it's a Gen II drive, and yes that is the correct kit. Although it is missing the face seal and face seal installation tool. http://www.iboats.com/Face-Seal-Too...3191508--session_id.249840214--view_id.172013


View attachment A1G2 Impeller Replace.pdf

 

[adviner]

Re: Trying to figure out the right impeller kit for my boat

Great Thank You. As far as the gear oil Does it have to be a certain weight?

 

[adviner]

Re: Trying to figure out the right impeller kit for my boat

And would this be the pump I use to put the gear oil back?

http://www.iboats.com/Gear-Lube-Oil...64903863--session_id.465812249--view_id.70537

 

[Don S]

Re: Trying to figure out the right impeller kit for my boat

And would this be the pump I use to put the gear oil back?

http://www.iboats.com/Gear-Lube-Oil...64903863--session_id.465812249--view_id.70537

Yes.