Trying to figure out what kind of boat this is

[lifewithoutlimits2008]

I bought this boat to restore but have no idea what it is. If the motor matches it would be a 1963 but Im not sure. Any help anyone could give would be appreciated.
http://s641.photobucket.com/albums/uu136/lifewithoutlimits2008/

 

[puddle jumper]

Re: Trying to figure out what kind of boat this is

The top looks like an add on. I cant tell you what boat it is but if there is a vin on it or regeneration for it that should give you a direction

 

[tashasdaddy]

Re: Trying to figure out what kind of boat this is

Pam has an old Cobia Sea Queen that looks like that. if also has european lines.

 

[ezmobee]

Re: Trying to figure out what kind of boat this is

Neat looking boat. The motor is definitely a 60's Johnson.

 

[puddle jumper]

Re: Trying to figure out what kind of boat this is

I saw an aluminum boat today that looked like that. It was an Aroliner and about 1957 vintage. Hope this helps.

 

[MikDee]

Re: Trying to figure out what kind of boat this is

The laps on the sides, and hull design, remind me of an old Glaspar.

 

[Landscaping Wiz 808]

Re: Trying to figure out what kind of boat this is

It kind of looks like an old Glaspar except the corners are rounded more - Euro like TD said. Whatever it is, it's COOL! Plus it's already gutted so you can turn it into whatever you want it to be!

BTW - Looks like the floor was removed by the previous owner, are the stringers intact? How's the transom?

BOB

 

[sand piper III]

Re: Trying to figure out what kind of boat this is

I think Doral built small boats like that.

 

[Mark42]

Re: Trying to figure out what kind of boat this is

Bell Boy's look like that too.

Go to fiberglassics.com and post the photos there. They can probably help you identify it. Then come back here and we'll help with any restoration issues you run across.

 

[lifewithoutlimits2008]

Re: Trying to figure out what kind of boat this is

Thanks for all of the input guys. The hull is in good shape but the floor, stringers, and bulkheads are all gone. Thatss the first thing im going to replace before it even sees water. I will post on fiberglassics to see what I can find out. Ill post pics as it comes along.