U Joint Bellow Question

[jorgeoliva]

Ok one more question on the bellows where the clamp is the bellow have a flat side on both side does this go up and down or on the side another question when I put the hinge pin in should I use lock tite and torque to proper pounds I thing I read is 90 lb

 

[alldodge]

Flats go on the sides, and if you can tell us what you have Alpha or Bravo drive and what model

 

[jorgeoliva]

alpha I gen 2 year 2000

 

[jorgeoliva]

should I use locktite on the hinge pin

 

[alldodge]

Here is your procedure for pins

 

[jorgeoliva]

great many thanks