Can anyone tell me what frequency to expect for the signal going to the tachometer? Is 1:1 ratio?
M MaggieRose Seaman Joined Oct 4, 2007 Messages 65 May 8, 2008 #1 Can anyone tell me what frequency to expect for the signal going to the tachometer? Is 1:1 ratio?
L Laddies Banned Joined Sep 10, 2004 Messages 12,218 May 8, 2008 #2 Re: V6 150 HP Tach signal That depend on the tach setting or number of pulses it was built for, this should help http://ww2.tflx.com/obtachtrad.html
Re: V6 150 HP Tach signal That depend on the tach setting or number of pulses it was built for, this should help http://ww2.tflx.com/obtachtrad.html
j_martin Admiral Joined Sep 22, 2006 Messages 7,474 May 8, 2008 #3 Re: V6 150 HP Tach signal The older v6's, either 16 amp or 40 amp, have 12 pole alternators in them. That would be 6 cycles per rotation, or 100cps at 1000 rpm. (100hz at 1000 rpm) hope it helps John
Re: V6 150 HP Tach signal The older v6's, either 16 amp or 40 amp, have 12 pole alternators in them. That would be 6 cycles per rotation, or 100cps at 1000 rpm. (100hz at 1000 rpm) hope it helps John
M MaggieRose Seaman Joined Oct 4, 2007 Messages 65 May 8, 2008 #4 Re: V6 150 HP Tach signal Thanks again, guys!
