rustylites
Recruit
- Joined
- Aug 20, 2012
- Messages
- 3
I have been searching these pages and figure, most likely U joints? but here are my specifics, would appreciate another opinion, Thanks!
2006 Four Winns 240 with 225 hrs. makes a howling (dry or spun bearing) sound at idle, best I can tell from behind the engine. It doesn't change pitch when I put it in gear or turn right to left. There is a slight vibration at the wheel lock either direction but has done that since it was new. Engine runs perfect shifts great. Oil pressure 30lbs idle 75 at 3000rpm, temp constant 175. Engine oil and gear lube full and look beautiful: like honey. No water leaking in bilge, not a drop.
2006 Four Winns 240 with 225 hrs. makes a howling (dry or spun bearing) sound at idle, best I can tell from behind the engine. It doesn't change pitch when I put it in gear or turn right to left. There is a slight vibration at the wheel lock either direction but has done that since it was new. Engine runs perfect shifts great. Oil pressure 30lbs idle 75 at 3000rpm, temp constant 175. Engine oil and gear lube full and look beautiful: like honey. No water leaking in bilge, not a drop.