I just bought a new aluminum prop for this outdrive . Old prop had no part number visible only 15x17 marking. When I called to buy the new prop they told me that my prop was replaced by 3817467. The old number I believe was 3850300.
Now here is my problem. The old prop had a rubber hub in the forward end of the prop housing. The new one does not and it does not seem that one could be installed. Can anyone give some advise as to what nut kit I would use on this as everything I am looking at has a collar in it. My present set up is a spacer on the front end followed by another small spacer , locknut and cotter pin.
This is a 1999 outdrive on a Chaparral Sig 240
Thank you for any help you may give
Joe F.
Now here is my problem. The old prop had a rubber hub in the forward end of the prop housing. The new one does not and it does not seem that one could be installed. Can anyone give some advise as to what nut kit I would use on this as everything I am looking at has a collar in it. My present set up is a spacer on the front end followed by another small spacer , locknut and cotter pin.
This is a 1999 outdrive on a Chaparral Sig 240
Thank you for any help you may give
Joe F.