Water pump pulley

[ydrahmij]

Am in need of a water pump pulley for my 3.0L Mercruiser inboard. The pulley has three grooves with the two next to the engine block being 7 3/8 inches in diameter and the front (power steering) pulley being 4 3/4 inches in diameter. On my application, the center groove is not used. The measurements were taken at the pulleys widest point. If anyone knows where I may find one of these, preferably used, please let me know. Thanks.

 

[Bondo]

Re: Water pump pulley

Am in need of a water pump pulley for my 3.0L Mercruiser inboard. The pulley has three grooves with the two next to the engine block being 7 3/8 inches in diameter and the front (power steering) pulley being 4 3/4 inches in diameter. On my application, the center groove is not used. The measurements were taken at the pulleys widest point. If anyone knows where I may find one of these, preferably used, please let me know. Thanks.

Ayuh,.... Used is gonna be Tough,... P/S is a Rare option on the 3.0l motors....

Ya might end up goin' to Merc for a New 1...

Whatsa matter with yer's,..??

If Rusted, is sandin' 'n paintin' an option,..?? or is it too far gone,..??

 

[ydrahmij]

Re: Water pump pulley

Mine is toast and a local dealer quoted me $157+ for a new one. I just can't see $157 and hate being robbed without someone holding a gun on me.

 

[Don S]

Re: Water pump pulley

Give a phone call to Seaway Marine
Have used him many times for used parts and he always seemed to have them, or knew where to get them.

 

[ydrahmij]

Re: Water pump pulley

Thanks. Will give them a shout.