Mikesboats
Cadet
- Joined
- Oct 19, 2004
- Messages
- 9
have checked all grounds, plugs, wires etc. pulling with rope start, plugs out, 90 % of time don't get a spark that will jump 3/8ths inch, 10% it does spark.<br />after many pulls will start & runs great, looking at spark with plugs out & grounded, manual states ingt. coil .23 ohms at primary & this checks good, secendary calls for 2600 ohms & only get this when measure between #1 & #2 terminals but not to ground from either, is this normal? Thanks in advance, Mike.