What is this Prop For?

[onecb]

I bought a very nice looking Stainless Steel prop. It was used but in very good condition. Brought it home to put on my boat. It fits but, it is like it is a quarter inch too large in diameter. It is a Quick Silver Mirage. The model number is: 48 13703 A41 21p. My boat has a 2008 Mercruiser Alpha One drive. Is there anyway to find out what this prop was made to fit? Thanks for any help you can provide. Alvin

 

[180shabah]

Re: What is this Prop For?

little more info:

1/4 inch too big at the hub or overall diameter?

If overall, do the blades hit the AV plate or just the torque tab?

 

[onecb]

Re: What is this Prop For?

It's overall and it just hits the trim tab.

 

[Bondo]

Re: What is this Prop For?

It's overall and it just hits the trim tab.

Ayuh,... Then it Fits as it Should...
You just need a Different torque tab..Or the Flat 1 if you have P/Steering...

 

[180shabah]

Re: What is this Prop For?

If you DONOT have p/s, then replace the tab with an offset one.

If you DO have p/s, then you can either use the offset tab, or just take a grinder to it (the tab, not the prop). Then go enjoy a day on the water.