I recently purchased a set of dt200 carbs on ebay. When I opened the box something told me to measure the bore of the carbs and take down the part numbers. When I compared the bore diameter of the carbs I received to the 175 hp carbs I was replacing they were 4mm smaller and after I looked up the part numbers on brownspoint they belonged to a dt150 not the 200. the guy I bought them from says he has another set that he personally removed from a dt200 and they have the same number and are similar to the ones he sent me. I forwarded the information to him from brownspoint and returned the carbs to him but now I am curious. Are the bores actually smaller or did someone play the old swictheroo with this guy and maybe put 200 stickers on a his 150 hp motors. At any rate I need either a set of 175 or 200 carbs is good shape as mine have all but one needle jet busted off and plugged.
