what year is my islander 22???

alumi numb

Petty Officer 1st Class
Joined
Nov 12, 2008
Messages
299
serial # is 69-22429.:confused:
i bragged about it here before and said it was a 1970 but really don't know.
while i'm at it mercruiser 120 serial # is 2459880.
what impeller kit would i need?
have replaced all wood inside "oak ply cabin wall and door" and looking good.
i'm slow but project moving along.
thanks.
 

Pugetsound

Lieutenant Commander
Joined
Apr 5, 2009
Messages
1,824
Re: what year is my islander 22???

My 22 ft holiday , has a rear id stamp says 22======= my neighbors 22 Islander has a pre date on it as well. I presume your Islander is a 1969 model. Is there not a plate by the helm with a starcraft logo and info on what the boat should hold -hp - and weight? The Id is on the right rear of the transom on the outside near the top. It is stamped into the corner bracked on mine. Sounds like a project.
 

alumi numb

Petty Officer 1st Class
Joined
Nov 12, 2008
Messages
299
Re: what year is my islander 22???

My 22 ft holiday , has a rear id stamp says 22======= my neighbors 22 Islander has a pre date on it as well. I presume your Islander is a 1969 model. Is there not a plate by the helm with a starcraft logo and info on what the boat should hold -hp - and weight? The Id is on the right rear of the transom on the outside near the top. It is stamped into the corner bracked on mine. Sounds like a project.

the plate by the helm is were i got the s.n. from but i see no specific date on it.
yes she is a project and i also presumed her to be a 1969.
when metals were at there high point i picked her up for $350. and had planned on scrapping her out for profit.
you know how boats are and after really looking i couldn't do it, so.
now i need to find out what impeller kit i need.
the engine turns over fine but don't want to fire it up without replacing the impeller.
thanks and good boating.
 

alumi numb

Petty Officer 1st Class
Joined
Nov 12, 2008
Messages
299
Re: what year is my islander 22???

found it and bought it plus an aligning tool already had a new gimbal bearing.
over and out, take care.
 
Top