while engine is out

[endless summer]

Since the engine is out of my boat for a freshen up while I wait on the exhaust manifolds, what else should I replace while out. The transome gaskit looks good but it is the original. Any suggestions? thanks. My boat is a 1987 Fabuglass 19 with a OMC V6,3.8 engine. This is the striger type and the manifolds were tough to find but should be here Tuesday.

 

[a.d.mobile]

Re: while engine is out

Get starter rebuilt!

 

[Blk-n-Blu]

Re: while engine is out

Check oil pan for rust.

 

[qystan]

Re: while engine is out

Gaskets, o-rings as a practice must be replaced whenever mating parts are separated. Re-use is risking leakages doing damage. <br /><br />While the engine is out, <br />1. install the oil change hose<br />2. is the steering oil cooler at the bottom like the merc,if yes, clean and do a leak check.<br />3. insp the exhaust horn at the transom housing.<br />4. remove and insp flywheel teeth<br />5. insp oil pan<br />6. insp drive coupler splines

 

[f_inscreenname]

Re: while engine is out

Replace bilge pump. If it is under the motor like mine.

 

[JasonB]

Re: while engine is out

The next time my engine is out I plan to:<br /><br />Clean/Repaint Bilge<br />Replace blower hoses<br />Install additional blower<br />Clean up wiring mess as needed by previous owner<br />Fish out all the tools, screws, bolts, nuts, etc I've dropped back there.....