Will this head fit my 3.0?

[Dante04SRT]

http://cgi.ebay.com/ebaymotors/Merc...ryZ33617QQrdZ1QQssPageNameZWD1VQQcmdZViewItem

My 3.0 head has the big valves, and this one appears to have the small ones (poss 2.5 specific), however, I need a head and need one CHEAP, considering I'm going to be rebuilding the motor this winter.

Anyway, will it work?

 

[tommays]

Re: Will this head fit my 3.0?

"Look closely at intake ports and match up with your head. This head uses the Felpro number 17300 intake gasket. Many people interchange this head with the number 2776954 casting but I would not reccommend it. This head has a 3 angle valve job and has been pressure tested and milled. The valve springs are new. No core charge, just keep your old unit."


Only you can look and make this call



Tommays

 

[Bondo]

Re: Will this head fit my 3.0?

Anyway, will it work?

Ayuh,......... Sure Will.........