wiring diagram needed for 87 omc cobra 5.0L

domnico

Cadet
Joined
Jul 28, 2007
Messages
8
My ballast resistor is diconnected and I can't find wire going to it. One side is connected to + side of coil. can't find other wire anywhere. boat not running right. boat is a 87 celebrity
 

KaGee

Admiral
Joined
Aug 14, 2004
Messages
7,069
Re: wiring diagram needed for 87 omc cobra 5.0L

Wiring diagrams are based on the power package, not the boat. You need a service manual for an '87 OMC Cobra. They cover all motors for that year.
 

Boatin Bob

Lieutenant Commander
Joined
Sep 24, 2001
Messages
1,858
Re: wiring diagram needed for 87 omc cobra 5.0L

OMC's don't normally have ballast resistors but have a resisitor wire in the main harness. It usually comes from a splice off the alternator to feed the coil. If you didn't have it the boat wouldn't run at all once you let the key go from start to run unless someone has done some creative re-wiring.
 
Top