Yam' 10 pin harness/switch wiring diagram

[dirtyclammer]

Im using an old switch and harness to test a motor. I had to cut all the connectors off the switch, and about 3 ft on the harness, so im left having to use butt connectors to splice them together.

My book only has the wiring for a 7 pin harness.
I connected each of the 5 wires together of the switch, to the corresponding colored ones of the harness. I left out the trim wires.

It turns over, but it doesnt give me any spark.

Im not using the nuetral switch or the buzzer or anthing. Im just hardwiring the keyswitch to the harness.

It's a '90 200 etxd.

Thanks =)

 

[dirtyclammer]

Re: Yam' 10 pin harness/switch wiring diagram

Nevermind, Fixed it! Went outside when it was finally dark and saw there had been spark the whole time... I had checked at noon and it appeared to not be sparking.
Silly me