Yamaha Fuel Connector Problem

[BigDVO]

I am not mechanically inclined at all. I pulled the end of my fuel line out of the motor and the little brass piece that sits in the motor end stayed on the fuel line end when I pulled out. I have no idea if anything else fell out when that happened. I pushed the sliver button and with some force I managed to pull the brass piece off the fuel line end. All I see in the motor end is the one male end that is usually there and a black rubber concave hole looking similar to a spark plug boot. Do I just push the brass piece back into that rubber or am I missing some parts? Is this an easy fix? Please help. (Motor is a 2006 90 2 Stroke)

 

[robert graham]

Push the connector back into the fuel line....maybe add a hose clamp or zip tie around hose to keep it from slipping off the fitting again..

 

[BigDVO]

Ok. So there is nothing that sits in that black boot but the brass piece that came off with the hose? I pulled it off at night and thought maybe something fell out from in behind. It will be tight to get in there with a zip tie or hose clamp.