Yamaha Sx250txrz Rodbolt

cousinabe

Senior Chief Petty Officer
Joined
Nov 13, 2001
Messages
765
Re: Yamaha Sx250txrz Rodbolt

you can buy an O2 test harness or use some small paper clips to tap into the O2 wiring harness to get DVM readings.

http://www.boatsetup.com/O2sensor.pdf
Disregard the Sensor Retesting /Bench testing procedures as they are useless.
 

rodbolt

Supreme Mariner
Joined
Sep 1, 2003
Messages
20,066
Re: Yamaha Sx250txrz Rodbolt

with the boat in the water and fully warmed up your looking to see the meter scale between about .45-.7 V.
the readings should constantly change.
running about 3500 RPM,hull unrestrained, you should scale between about .35 and .7 V.
below .35 its lean and above .7 its rich.
no codes for failure or contaminated O2 sensor.
if its dissconnected fuel is fixed rich at low speed and lean above 4000.
DO NOT run above 4000 with a bad or dissconected O2 sensor.
 
Top