Latest activity

What's new New posts Latest activity

Eric 3.7LX Alpha 1 replied to the thread Shift cable adjustment.

.

Sunday at 9:18 AM
Bob_VT reacted to roscoe's post in the thread S A F E T Y B R I E F I N G with Like.

Never say “hold my beer and watch this”. Better to be the one holding the beer.

Sunday at 8:49 AM
D

davegr123 reacted to Lyle29464's post in the thread The Dreaded Anti Siphon Valve with Like.

Re: The Dreaded Anti Siphon Valve Great thread. Just learned how to make a bomb.

Sunday at 8:45 AM
Bondo reacted to DeepCMark58A's post in the thread Outdrive service with Like.

buy a pump they are not expensive and make it very easy

Sunday at 8:42 AM
J

JDusza replied to the thread Need Help with 1984 115 hp Trim / Tilt Decision.

It looks like a pretty easy swap. That's why I'm thinking I wouldn't even try to rebuild the current unit. If I can put one in as easy...

Sunday at 8:21 AM
J
Joe217 replied to the thread 1986 85hp force 856X6L---Oil Plug retap.
Sunday at 7:57 AM
HillbillyGuy replied to the thread Temp sender removal ….

Well would ya look at what I found laying all cute. Have to wait on new gasket to get here, but removing the cover was the correct...
Sunday at 7:46 AM
HillbillyGuy reacted to dingbat's post in the thread Temp sender removal … with Like.

Don’t need a head…all you’re doing is “shocking” the interface between the screw on the base material to break loose the corrosion bond...

Sunday at 7:45 AM
J

Joe217 replied to the thread 1986 85hp force 856X6L no spark.

I took apart the one cdi I replaced.......... the box is split into two distinct separate sections ..... each side has a huge...

Sunday at 7:39 AM
dingbat replied to the thread Temp sender removal ….

Don’t need a head…all you’re doing is “shocking” the interface between the screw on the base material to break loose the corrosion bond...

Sunday at 7:39 AM
B

boscoe99 replied to the thread Prop Shaft "mid bearing" part number help.

Look at the gear case housing for whatever markings you can find. What are you seeing?

Sunday at 7:37 AM
J

Joe217 reacted to Nordin's post in the thread 1986 85hp force 856X6L no spark with Like.

Sounds like you have one output channel at one CD module that is bad. Each CD module has two output channels soo a two cylinder engine...

Sunday at 7:34 AM
J

Joe217 replied to the thread 1986 85hp force 856X6L no spark.

i ordered a second new cdi pack. The stator passes both tests........ ohm and dva....... ???????????? I will keep on trying to figure...

Sunday at 7:33 AM
J

Joe217 reacted to jerryjerry05's post in the thread 1986 85hp force 856X6L no spark with Like.

Yes you can loose half of the pack.' Oh yea, you can test the stator and it shows GOOD but can be BAD :(

Sunday at 7:31 AM
D

DeepCMark58A replied to the thread Outdrive service.

buy a pump they are not expensive and make it very easy

Sunday at 7:28 AM

Show older items

Top

View All

View All

View All

View All

View All

View All

View All

View All

Boat Bimini Tops

Boat Covers

View All

View All

View All

View All

View All

View All

View All

Latest activity

Follow Us