Latest activity

  • dwco5051
    dwco5051 reacted to dingbat's post in the thread New Stuff on Vehicles likes/dislikes with Like Like.
    No video, but some idiot tried to run over the blower backing the golf cart out of the garage the other day.
  • flashback
    That's very cool, you put the juice in the bank and withdraw as needed.
  • C
    Reason all your electrical connections are corroded is because the boat was filled with salt water some time. Recycling flooded boats...
  • A
    Atum replied to the thread No spark until end of cranking.
    Yes black plug. I will check plate in a few days and report back.
  • Grub54891
    Grub54891 reacted to Mc Tool's post in the thread rodent infestation with Like Like.
    Rabbits are a pest here too ...still , some fool introduced them in the 1830's and were my main hunting critter for the last 50 years...
  • ESGWheel
    Sorry for the delay. Looks like you are in good hands with Lou and Scott. Here is some tips and tricks on the risers and manifold...
  • Scott06
    Scott06 replied to the thread I have a leak..
    Easy to do I tore a CV joint boot installing an axle only to see grease splattered a week later … any sharpe edge Could have been...
  • C
    Crosbyman replied to the thread New to me 18 hp Evinrude..
    Visit the AOMCI western site ( link posted above) for great docs covering condensers, testing, repairs and if you plan working oldies...
    • 1756297440624.png
  • nola mike
    nola mike replied to the thread Mercruiser 3.0 won't "lock in".
    probably won't need a gimbal puller (and I don't know that I'd replace it if it's good, though wouldn't fault you for it). with the...
  • T
    The Talon is a Yamaha brand propeller, just the talon series. The washer being used is also a Yamaha washer (part number in post above)...
  • dingbat
    No video, but some idiot tried to run over the blower backing the golf cart out of the garage the other day.
  • P
    Pmt133 replied to the thread I have a leak..
    Doesn't make sense, don't know how it got there, but here's to hoping this it it and I didn't puncture this pulling the bellows out...
    • 20250826_123354.jpg
  • J
    jackhart replied to the thread Paddle wheel?.
    Really!
  • R
    racerone replied to the thread New to me 18 hp Evinrude..
    Condensers should be tested ( MERC-O-TRONIC ) magneto analyzer.----Often test OK when cold.-----Fail when warmed up.
  • jerryjerry05
    jerryjerry05 replied to the thread Force 120hp Major Overheat.
    More info? year?? Pic of the pump, housing? IF??? the boat had set for a long time? the insects get up in the holes and make nests for...
Top