Latest activity

What's new New posts Latest activity
  • redneck joe
    redneck joe replied to the thread Orange/Black Carpet.
    welcome to the forum. black will be hot on the feet.
  • redneck joe
    redneck joe replied to the thread Nobody fishing?.
    my fav fish other than yellow perch. they need to be on the larger size to make it worth it but very fine grained flesh
  • Lancerdad34
    Lancerdad34 replied to the thread Perco bat switch problem.
    Put boat in yesterday and boat started on both 1 and 2. Go figure!
  • redneck joe
    redneck joe reacted to Grub54891's post in the thread Random with Like Like.
    Gee… reminded me of going down Siskiwit lake as a pre-teen. Going fishing and the little five horse outboard singing along. I happened...
  • G
    Gregb131 replied to the thread Mercury 110 9.8hp.
    The red button is the kill button. I just installed that to replace the stock push button stop. So I was correct in saying the orange...
  • Texasmark
    Texasmark replied to the thread Replacing reverse gear only?.
    Other thing is that gears "wear in" with their counterparts....little peculiarities. Mating a new surface to a "run in" gear "could be"...
  • Texasmark
    Texasmark replied to the thread Mercury 110 9.8hp.
    Looks like the red button is the kill button. Purpose is to ground out (kill) the triggers. It takes a ground connection, through the...
  • C
    Chrisham replied to the thread My new project.1972 johnson 25e72r ..
    There was no plastic retainer but a thick fibrous material.Looked like the same stuff as the old packing washers but thicker one...
  • Texasmark
    Texasmark replied to the thread G3 Boat.
    I can help you with the crack. Get a reasonably sized drill bit, maybe 3/8" in diameter and a smaller bit...maybe 1/8" and several...
  • C
    Chrisham posted the thread 1962 evinrude fastwin 15036 fuel issue in Johnson & Evinrude Outboards.
    I have been posting about this motor lately.I had it running great.I have had it in the drum cranking it for 5 days.This morning it was...
  • G
    Gregb131 posted the thread Mercury 110 9.8hp in Mercury & Mariner Outboards.
    Installing a tethered kill cord on my 9.8. Looking to confirm what wire I tie into. Am I correct in saying I tie into the orange wire...
    • IMG_0314.jpeg
  • J
    jlh3rd replied to the thread Mercruiser 888 Unexpected Prop behavior?.
    "any thoughts?" if jimmbo is right, you were only 400 rpm below the max. Increasing the diameter, # of blades, and pitch, decreases...
  • Tafflad
    Tafflad posted the thread Refresh to Dash Project in Four Winns Boats.
    I have a Four Winns H210 …. and have never been happy with the dash. There was a sunglasses tray in the centre, and no dedicated depth...
    • adjusted-3.jpg
    • Mini.jpg
    • Mini-2.jpg
    • Mini-3.jpg
    • Mini-4.jpg
  • Grub54891
    Grub54891 replied to the thread Random.
    Gee… reminded me of going down Siskiwit lake as a pre-teen. Going fishing and the little five horse outboard singing along. I happened...
  • dingbat
    dingbat replied to the thread Busbar addition..
    What are you installing that you need 2/0 connected to a busbar?
Show older items
Top